The application error 0xc0000142 can happen in a variety of times. Usually a reboot solve the problem, but you may need to do some other things to permanently solve, none of which are for the faint of heart. But do not worry worst case is that you have to reinstall the whole system. It will not cause any hardware damage.
What is this error?
This error is usually a failure to initialize a DLL correctly. This could be because the file is damaged, missing, or can has been added with malicious code. None of these is a big problem and can be solved easily. With a little 'troubleshooting you can be back up and running in no time.
How to solve?
At the end of the first thing I would do to correct this error is to see if it is happening to one or more applications. If more than one, then you probably want to do a sfc / scannow from a DOS prompt on the installation disk. This will scan all the system files and replace them with good versions for the OS. Once the process is complete reboot the machine. It 'important to note that these are form the operating system so that applications can have problems and need to be reinstalled if you happen to use one of the files that are replaced. Even if they use the file is likely to go well.
The application error 0xc0000142 can be caused by a variety of reasons so the solution above may not fix the problem. So you may need to perform some type of registry cleaner to help also. Just make sure you back up the registry before you try to build something so you do not have bigger problems later.
Because there are a number of reasons for this error there is no definitive solution to solve the problem. You want to run the SFC command just to make sure you do not have any problems with the system files. From there a registry cleaner will be extremely useful not only for the cleaning of the registry, but to check the positions of all of the pointers and to ensure you do not have other DLLs issues.
In the worst case, if these solutions do not solve then you want to make sure you have a current backup of all the important information and reload the operating system and then you'll applications. Make sure that you run a registry cleaner afterwards to make sure you have a copy of the registry backup so that you do not have this problem in the future, along with any of the multitude of possible problems you may run into with registry.
due to error and that it is such a generic error (application error 0xc0000142) there really is not much to go on for resolve the problem. But with a little 'patience and SFC and then running a cleaner you should be able to fix it with minimal effort and to be up and running in no time again.
0 Komentar